Yamaha HTR-5280 - AV Receiver - 5.1 Channel Manuale di servizio - Pagina 19

Sfoglia online o scarica il pdf Manuale di servizio per Ricevitore Yamaha HTR-5280 - AV Receiver - 5.1 Channel. Yamaha HTR-5280 - AV Receiver - 5.1 Channel 46.

5. SPEAKERS SET
The input signal is automatically identified in the order of dts → DOLBY DIGITAL → PCM → Analog.
There are five sub-menu items as follows. The signals output from the DSP block are the same as 1. DSP THROUGH: DSP
0dB.
MAIN: SMALL 0dB
[Remote control code: 7A-88 (PRG 1)]
LFE: BASS:MAIN
[Remote control code: 7A-8B (PRG 4)]
The analog switch settings for each sub-menu are as shown in the table below.
1
2
3
4
5
LARGE: Signals are output in all bandwidths.
SMALL:
Signals lower than 90Hz are mixed in the channel specified by LFE/BASS.
NONE:
The center contents are distributed to the MAIN L/R channels after -3dB.
6. DISPLAY CHECK
This program is used to check the FL display section. The display condition varies as shown below according to the sub-
menu operation. The signals are processed using EFFECT OFF (The L/R signal is output using ANALOG MAIN BYPASS.)
The video signal internal/external synchronization switching is controlled by the microprocessor. When the initial message is
displayed and all the FL segments light up, it is switched to the internal synchronization but other than that it is forced to the
external synchronization setting.
Also, except for the initial display, 128 pictographs for checking the OSD driver are used for the video signal output display.
[Remote control code: 7A-8F (PRG 8)]
Initial display
Segment conditions of the FL driver and the FL tube are checked by turning ON and OFF all segments. Next, the operation
of the FL driver is checked by using the dimmer control. Then a short between segments next to each other is checked by
turning ON and OFF all segments alternately (in lattice). (In the above example, the segments in the second row from the top
are shorted.)
MAIN: LARGE -10dB
[Remote control code: 7A-89 (PRG 2)]
Front Mix: 5ch
[Remote control code: 7A-8C (PRG 5)]
Sub-menu
CENTER SP REAR SP
MAIN:SMALL 0dB
LARGE
MAIN:LARGE -10
LARGE
CENTER:NONE
NONE
LFE/BASS:MAIN
SMALL
FRONT MIX:5CH
LARGE
CABLE
DVD
VIRTUAL
DTS MOVIE THEATER 12
D-TV/LD
MD/TAPE
DIGITAL
DOLBY DIGITAL
CBL/SAT
CD-R
PRO LOGIC ENTERTAINMENT
PRO LOGIC
VCR 1
TUNER
DSP
VCR2/DVR
CD
6.1/ES
SP
V-AUX
PHONO
PCM
A B
All segments OFF
VIRTUAL
DTS
DOLBY
NEWS
PRO LOGIC
PRO LOGIC
6.1/ES
Lighting of segments
Lighting in lattice
in lattice
Short
Normal
MAIN SP
MAIN LVL
LARGE
SMALL
0dB
LARGE
LARGE
-10dB
LARGE
LARGE
0dB
SMALL
LARGE
0dB
LARGE
LARGE
0dB
PS
PTY
RT
CT
CABLE
DVD
VOLUME
PTY HOLD
EON
STEREO AUTO
D-TV/LD
MD/TAPE
NEWS INFO AFFAIRS SPORT
ZONE 2
MEMORY
TUNED
SLEEP
CBL/SAT
CD-R
VCR 1
TUNER
VCR2/DVR
CD
dB
V-AUX
PHONO
ms
1
VOLUME
PTY HOLD
STEREO
NEWS
AFFAIRS
TUNED
SLEEP
CD
RX-V800/RX-V800RDS/HTR-5280
CENTER: NONE
[Remote control code: 7A-8A (PRG 3)]
LFE/BASS
SWFR
BOTH
BOTH
MAIN
BOTH
PS
PTY
RT
CT
VIRTUAL
DTS MOVIE THEATER 12
PTY HOLD
EON
STEREO AUTO
DIGITAL
DOLBY DIGITAL
NEWS INFO AFFAIRS SPORT
ZONE 2
PRO LOGIC ENTERTAINMENT
MEMORY
TUNED
SLEEP
PRO LOGIC
DSP
6.1/ES
SP
PCM
A B
All segments ON (dimmer 100%)
PS
PTY
RT
CT
VIRTUAL
DTS MOVIE THEATER 12
PTY HOLD
EON
STEREO AUTO
DOLBY DIGITAL
DIGITAL
NEWS INFO AFFAIRS SPORT
ZONE 2
PRO LOGIC ENTERTAINMENT
MEMORY
TUNED
SLEEP
PRO LOGIC
DSP
6.1/ES
SP
PCM
A B
All segments ON (dimmer 50%)
CABLE
DVD
VOLUME
D-TV/LD
MD/TAPE
CBL/SAT
CD-R
VCR 1
TUNER
VCR2/DVR
CD
dB
V-AUX
PHONO
ms
CABLE
DVD
VOLUME
D-TV/LD
MD/TAPE
CBL/SAT
CD-R
VCR 1
TUNER
VCR2/DVR
CD
dB
ms
V-AUX
PHONO
18