AlphaVision 16 Manuale d'uso - Pagina 7
Sfoglia online o scarica il pdf Manuale d'uso per Pannello di controllo AlphaVision 16. AlphaVision 16 12.
Stampa la paginaF10#
Show historical overview on display from keypad
Continuation of the table with functions and corresponding user levels:
F11#
Print historical overviewt via connected printer module
F12#
Turn on logprinter
F13#
Turn off logprinter
F14#
Print overview of the userscodes via connected printer module
F15#
This function is only for the engineer
F16#
This function is only for the engineer
F17#
Test the battery of the control panel and the batter(y)(ies) of the
I/O modules who are present
F18#
This function is only for the engineer
F19#
Test outputs
F20#
Display open zones
F1# Activating the RESET output
The RESET output can be used with some fire detectors. It can also be used in other special applications. If this
function can be used with the control panel, the engineer will explain how this function works. Executing this
function, also with systems where it is of no use can not do any harm.
Executing this function means that the output, programmed by the engineer, will be activated shortly.
Push the keys <?> <1> <#> followed by a PIN-code of level 4 or 5.
The display shows several seconds:
The RESET output is
activated
F2# Doorbel on/off
The AlphaVision 16 or AlphaVision 96 may be installed with a doorbell-function. The working of this doorbell-
function is installed by the user by means of function 2. Executing this function, also with systems where it is of
no use can not do any harm.
Push the keys <?> <2> <#> followed by a PIN-code of level 4 or 5.
The display shows the message:
Doorbell function:
<*>=OFF <#>=ON
Then push the key <*> if the doorbell function must be disarmed. Or push<#> if the doorbell-function
must be armed.
F3# Adjust DATE
The control panel disposes an own clock including date. To adjust this date with the present date, function 3 must
be executed.
Push the keys <?> <3> <#> followed by a PIN-code of level 4 or 5.
The display shows the message:
Change date into
01-01-94 DDMMYY
User manual AlphaVision 16/96 *** 21 augustus 2003 ***
Enter the current date: 2 digits for the day, 2 digits for the month
code level 4, 5 or 6
code level 4, 5 or 6
code level 4, 5 or 6
code level 4, 5 or 6
code level 5
code level 6
code level 6
code level 4, 5 or 6
code level 6
code level 5 or 6
code level 1 or higher
Page 7