Discount Car Stereo A2D-3.5M Manuale di installazione rapida - Pagina 2

Sfoglia online o scarica il pdf Manuale di installazione rapida per Adattatore Discount Car Stereo A2D-3.5M. Discount Car Stereo A2D-3.5M 3. For radios with aux input jack

Stampa la pagina

PRODUCT SAFETY & DISCLAIMER

READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE

PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY

•

This installation guide is provided as a GENERAL installation guide, some vehicles vary and

may require additional steps. We do not accept responsibility for third party labor charges

or modifications. Exercise due-diligence when installing this product.

•

We do not accept any responsibility for vehicle damage or personal injury resulting from

the installation of this product.

Careless installation and operation can result in equipment damage

Requirements

aux jack

Introduction

Many have aftermarket and factory radios with AUX jacks through which they

are able to connect and listed to their audio devices, but with the A2D-3.5M add-

on module; they no longer have to deal with plugin in and disconnecting their

devices. The A2D-3.5M automatically pairs/unpairs Bluetooth device (e.g.,

Smartphone, Kindle, Tablet etc.) upon entering/exiting vehicle.

turn directions, music Apps (e.g. Apple music, Pandora, Spotify) on the radio as

you drive or at home. This solution is a welcome upgrade for those with

Bluetooth enabled devices in their cars or at home.

See Frequently Asked question at the end of this guide for details.

Installation

All radios (factory or aftermarket) must have 3.5mm input jack or AUX input

adapter and a 12VDC power source for the A2D-3.5M to work.

Locate aux input jack on radio face, armrest, glovebox etc. auxiliary input

adapter (See Fig. 1) or aux input on home stereo

Enjoy turn-by-

Fig. 1

Aux input jack

Connect module 3.5mm plug (See Fig. 2) to audio device 3.5mm Input

(See Fig. 1)

Fig. 2

Connect module red wire to suitable 12VDC ACC supply in vehicle and

black wire to ground (See Fig. 2)

For home use, a 12V AC-DC transformer is required.

Secure module and proceed to next section.