3D Hobby Shop 59" AJ Slick Manuale di installazione - Pagina 13

Sfoglia online o scarica il pdf Manuale di installazione per Aerei 3D Hobby Shop 59" AJ Slick. 3D Hobby Shop 59" AJ Slick 20.

Install the pushrod connectors onto the servo arms as shown. Tighten the nuts just to a snug fit – the

connector must be able to rotate after installation. Use medium or thick CA glue on the nut to keep

the connector from falling off due to vibration. Remember – the pushrod connector must be able to

rotate so that the servo arm can move.

Install elevator servo extension onto elevator servo, and install elevator servo into fuselage as shown.