Acoustic 260 Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Amplificatore Acoustic 260. Acoustic 260 12. 100 watt, 1 x 10” bass mini-stack

Acoustic 260 Manuale d'uso

pANEL CONFIgURAtION

PASSIVE
ACTIVE
INPUT
INPUT
1
froNT pANEl
1. 1/4" bass guitar inputs for passive or
active pickups. (Active = -15 dB)
2. If you are using a bass guitar with an
on-board preamp, set this volume
control level to its middle position
before increasing the amp's volume,
as distortion may occur otherwise.
3. Low frequency control set to boost
(15 dB) or cut (-15 dB) frequencies at
60 Hz. Controls lower fundamental
frequencies to enhance warmth and
provide deep, full tones.
4. Midrange frequency control set
to boost (15 dB) or cut (-15 dB)
frequencies at 340 Hz. Allows you
to add thickness and body to your
bass tones.
260 OWNER'S MANUAL
260 OWNER'S MANUAL
1 0 0 W A T T , 1 X 1 0 " B A S S M I N I - S T A C K
1 0 0 W A T T , 1 X 1 0 " B A S S M I N I - S T A C K
2
3
AUX
4
5
6
5. High frequency control set to boost
(15 dB) or cut (-15 dB) frequencies
at 2 kHz. Adds punch to your bass
guitar's sound.
6. This 1/8" aux input jack will allow
you to plug in a CD/MP3 player or
another source to practice with. To
control the source volume, adjust
the output volume of the device. We
suggest you turn the volume all the
way down, plug in, and then adjust
the volume according to your taste.
7. 1/8" headphone jack will disconnect
the internal speaker when used.
8. When this light is on, your amp is
ready to be played.
9. Power switch turns the amp on
and off.
260
7
8
9
5