Altronics A 4488 Manuale di istruzioni per l'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Microfono Altronics A 4488. Altronics A 4488 8. Paging

Connecting the BGM (Background Music)

Backgound music can be supplied to the paging system by connecting an audio source such as a mobile phone, tablet etc.

to the 3.5mm input jack on the rear of the paging microphone. Figure 7 shows the position of this connector.

To activate the background music, first make sure the Push to Talk (PTT) switch is in the centre position and then select

the zones to receive the background music. The selected zones led indicators will flash to signify they have been selected.

Next move the PTT switch to the up position which is lablelled "Lock On". While the switch is in this position and only this

position will the background music will be piped out to the zones selected.

The volume is adjusted by the BGM volume trimpot on the rear of the microphone.

If the PTT switch is moved to the "Page" position the background music will stop and paging will be active.

If the PTT switch is in the centre position the BGM and paging are not active.

If background music is required again to the same zones as previously selected, then all thats needed to initiate it again is

to move the PTT switch back to the "Lock On" position.

If the BGM is to be piped to different zones then it is only a matter of selecting the new zones, and then moving the PTT

switch to the "Lock On" position.

A 4488

4 Zone Communicator

Lock On

Page

System Busy

TO ACTIVATE THE BGM

MOVE THE SWITCH TO

THE "LOCK ON" POSITION

Redback® Proudly Made In Australia

Connecting an audio source to the BGM input

24VDC In

All Call

Cancel

ADJUST THE BACKGROUND

MUSIC VOLUME

DIP Switches 1-2 Settings

BGM

Mic

BGM

Chime

PA System Chime On

PA System Chime O

Input

Volume

Internal Chime On

Internal Chime O

1 2 3 4

REAR OF A 4488

Fig 7

BACKGROUND

MUSIC SOURCE