Altronics C 5201 Istruzioni - Pagina 2

Sfoglia online o scarica il pdf Istruzioni per Subwoofer Altronics C 5201. Altronics C 5201 2. Home theatre system/hi-fi active subwoofer

Fig1: Connection of the C 5201 via low level or RCA

inputs. NOTE: The high level outputs will not produce any

output in this configuration.

Fig4: In the event of hum in your signal, insert a

ground loop isolator between the subwoofer and the

amplifier.

Troubleshooting hum noise (Fig 4)

If a hum exists in your subwoofer after connection to your sys-

tem we suggest that the mains power is connected to the

same mains power outlet as the amplifier and input sources.

If this is not possible we suggest a ground loop isolator such

as an Altronics C 9555 is inserted in the signal line (ie RCA

inputs) between the main amplifier and the subwoofer unit.

Page 2

Fig2: Connection of the C 5201 via high level or speaker inputs.

Typical 5.1 Channel System Setup.

Fig3: Connection of the C 5201 to a 5.1 channel home theatre amplifier. NOTE:

Most amplifiers have a mono RCA output for subwoofers, connect this up to

either left or right on the subwoofer's input.