Artos Denby M06860 Manuale di installazione - Pagina 5

Sfoglia online o scarica il pdf Manuale di installazione per Riscaldatore Artos Denby M06860. Artos Denby M06860 6. Towel warmer hardwired version

5. Determine location of #6 outer rear cylinder by measuring the brackets attached to towel

warmer. Attach #6 cylinder to wall with hole for #7 locking screw facing down on the bot-

tom brackets and facing up on the top brackets.

6. Feed the wire from the towel warmer through the tube from the hardwire kit, and slide wall

plate onto the tube.

6. Attach upper brackets with locking screw #7, leaving lower brackets free at this time.

7. Connect wire from towel warmer to the wire coming from the timer. Use the instructions

provided with timer as a guide.

8. Push tube up towel warmer cord, over plastic sleeve, until it touches the hexagonal

chrome collar.

9. Push towel warmer onto the bottom brackets and screw mounting plate to the outlet box

using the screws provided.

10.Insert lower locking screws ( #7 ) . Snap on caps #8.

11.Reconnect power supply. Program timer using the instructions provided with the timer.

Towel warmer will take approximately 30 minutes to heat up to full temperature.

12.ENJOY!

INSTALLATION STEPS