Arts Energy Smart Module Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Alimentazione Arts Energy Smart Module. Arts Energy Smart Module 18.

Installation & First time use

1. Install the Constant Current Power Supply (CCPS) dedicated

to charge the Smart Module. Check that the voltage printed on

the label corresponds to the nominal voltage of the battery, and

that the mains voltage corresponds to your AC network voltage.

2. Install the Smart Module by arranging the CCPS cord so that

it is accessible to connect it to the module, but not too close so

that heat generated from the CCPS will not be transferred to the

battery. Connect the CCPS to the Smart Module. Connect the

CCPS to the mains. The Smart Module status LED will be

orange.

3. Charge the battery until a green fixed status LED is

displayed. It may take longer than 48h for the first complete

charge.

4. Unplug the CCPS from the mains and unplug the Smart

Module. Check the LEDs shown by the Smart Module. When

pushing the button the 5 Gas Gauge LEDs should light up in

red.

5.Connect the main poles of the Smart Module to your

application (draining less than the 40A maximum current

available for the Smart Module) The battery should provide the

required current to the application.