Arts Energy Smart Module Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Alimentazione Arts Energy Smart Module. Arts Energy Smart Module 18.

Using the battery:

Connect the battery discharge cables to the main discharge

poles (1 & 6 as indicated on the front cover photograph of this

manual). Switch on the appliance and use until the battery is

fully discharged. Depending on the current drained in the

battery, the status LED indicates the following:

Green

Discharge

 If the discharge current is higher than 100 mA,

the gas gauge LEDs light up

 When the

connector is ON, the battery is close to the end of

discharge

Orange

Regenerative charge

 Battery receives a charge current higher than

100 mA

 When the

connector is ON, the battery is close to

regenerative charge limit (*)

 When the regenerative charge is not allowed,

the battery switches to Charge mode and may

pulse the incoming current

OFF

Standby, battery disconnected

 No voltage on main discharge poles

(*): only when the regenerative alarm option is selected For

some configurations, the battery can accept a regenerative

charge. This function allows recovering energy from a motor or

a reversible device powered by the Smart Module.

It is recommended to start to use the battery when the battery

temperature is in the -10°C to +40°C range.

It is possible to start the discharge from -20°C to +60°C

occasionally. However the service life will be reduced by using

the battery at high temperatures.

PreAlarm

signal on Specific

PreAlarm

signal on Specific