Aion Electronics ASTERIA MK. III Manuale - Pagina 7

Sfoglia online o scarica il pdf Manuale per Pedale musicale Aion Electronics ASTERIA MK. III. Aion Electronics ASTERIA MK. III 10.

DRILL TEMPLATE

Cut out this drill template, fold the edges and tape it to the enclosure. Before drilling, it's recommended

to first use a center punch for each of the holes to help guide the drill bit.

Ensure that this template is printed at 100% or "Actual Size". You can double-check this by measuring

the scale on the printed page.

Top jack layout assumes the use of closed-frame jacks like the

open-frame jacks, please refer to the

LED hole drill size assumes the use of a

size accordingly if using something different, such as a 3mm bezel, a plastic bezel, or just a plain LED.

INCH

ASTERIA PREAMP DRIVE MK. III

Open-Frame Jack Drill Template

5mm LED

bezel, available from several parts suppliers. Adjust

125B

0.625"

ø3/8"

ø1/2"

OUT

MASTER

x: -0.65, y: +1.71

ø9/32"

HI/LO

x: 0, y: +1.06

PRESENCE

ø1/4"

x: -0.65, y: +0.41

ø9/32"

CENTER (0,0)

LED

FOOTSWITCH

x: -0.775, y: -1.20

x: 0, y: -1.20

ø5/16"

ø15/32"

Switchcraft

111X. If you'd rather use

for the top side.

ø3/8"

VOLUME

x: 0.65, y: +1.71

ø9/32"

TONE

x: 0.65, y: +0.41

ø9/32"