Asko T731 Manuale d'uso e manutenzione - Pagina 11

Sfoglia online o scarica il pdf Manuale d'uso e manutenzione per Asciugatrice Asko T731. Asko T731 20. User manual use & care guide fr
Anche per Asko T731: Manuale di avvio rapido (2 pagine), Manuale di pianificazione e progettazione (19 pagine), Manuale d'uso e manutenzione (20 pagine), (Spagnolo) Guida all'uso e alla manutenzione (20 pagine), (Francese) Manuale d'uso e manutenzione (20 pagine)

Stampa la pagina

OPERATING INSTRUCTIONS

THE CONTROL PANEL

Power Button

Power

Indicator

Light

POWER BUTTON

The Power button turns the power to the machine on

and off. When the power is on, the power indicator light

glows red. The power must be on before you can start

the machine.

PROGRAM KNOB

Turn this knob to select a program. The programs are

described on the following page.

12:00 Position – This is where the line on the knob aligns

with the line above the knob. When the knob is in this

position, "00" displays on the LED to indicate no program

has been chosen.

LED WINDOW

The LED window displays the program number for the

Sensidry programs, as illustrated below:

The corresponding program numbers are:

Extra dry = P1

Dry = P2

When you select Timed Dry, the LED displays the

number of minutes selected, plus the cool-down time,

as illustrated below:

When you select Air Fluff, the LED displays the number

of minutes selected, as illustrated above. With both

programs 5 and 6, as the program advances, the LED

displays the remaining time.

"End" on the LED indicates the program is complete.

"C" indicates the program is in the cool-down cycle.

START BUTTON

After you have selected a program and the desired

options, press this button to start the dryer. The red

indicator light next to the Start button will come on. The

indicator light will go off when the program ends or has

been cancelled.

If you open the door during a program, the dryer will stop

tumbling automatically and the Start button indicator

light will blink. To continue the program, close the door

and press Start again. To cancel the program, press and

hold the Stop button until the Stop indicator light goes off

(approximately 3 seconds).

Programs

Iron dry

Timed dry

Air fluff

Program Knob

Normal Dry = P3

Iron Dry = P4

LED Window

Extra dry

Dry

Normal dry

Option Buttons

STOP BUTTON

You can interrupt a program by pressing and holding the

Stop button until the dryer stops. When you press Start,

the program will start from the beginning.

If you don't want the program to restart from the beginning,

you can stop the unit by opening the door. If you stop the

dryer this way, when you press Start the unit will continue

from the point it was interrupted.

OPTION BUTTONS

The option buttons allow you to select program time,

normal or low temperature, anti-crease, delayed start,

buzzer and quick cooling. Each of these options is deﬁned

in more detail in the following paragraphs.

TIME

If you set the program knob to Timed Dry or Air Fluff, you

must select the length of drying time by pressing this

button until the number of minutes you wish to dry the

load displays on the LED. The time advances in 5-minute

increments and you can select between 5 and 90 minutes.

If you pass the time you wanted to select, continue to

press the button until the correct time displays.

ATI-CREASE

The Anti-crease option prevents garments from wrinkling

if you're unable to remove them right away. You can select

one, two, or three hours by pressing the Anti-crease

button until the number of hours you prefer displays, as

illustraed below:

NOTE: "0" on the LED indicates the option is not

active.

When you set a time, the drum will continue to rotate after

the program is complete for three seconds every minute

until the door is opened or the selected time (1–3 hours)

has passed. If the buzzer is on, it will sound each time

the anti-crease program activates.

Start Button

Stop Button

Page 11