Asko TD40 Manuale di servizio - Pagina 5

Sfoglia online o scarica il pdf Manuale di servizio per Asciugatrice Asko TD40. Asko TD40 10.

Error messages

If an error or fault occurs in the course of the program this is indicated on the display.

N.B.

To reset the error message the main switch

T h e d i s p l a y

Description

shows

Over flow

Means that the condensation tank is full. If the con-

densation is pumped directly out via the drain hose,

check that there are no kinks or blockages in the hose.

Maximum program time

Thermistor fault

Heat protection (not provided on all machines)

Sensor fault

must be turned off.

Explanation / proposed measure

Drain the condensation tank and restart. If the error

message reappears this may mean that the lower

water reservoir is full because the pump or hoses are

blocked or worn.

When the machine has run for the maximum time (3

hours), the machine stops. Check and replace any

fuses that have blown in the house distribution box. To

quit the error message switch off the machine or open

the door. If this does not help call service.

The machine indicates whether there is an interrup-

tion in supply or short-circuit in the thermistor.

A thermostat in the rear section has indicated that the

heat has risen, which indicates that too much fluff is

building up in the filter and condensation package.

Clean the filter and condensor

Fault in the moisture sensor. The moisture value is

unreasonable, <0V or > 6V for 300 seconds. This

error message may also appear if you are drying

clothing that is already dry or if the machine is empty.

Open the door and the message will disappear.