- ページ 6
ヒーター ASKOMA AHIR-BI-plus-1.75のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ASKOMA AHIR-BI-plus-1.75 10 ページ。 Screw-in heater r1 1/2 for drinking and heating water
ASKOMA AHIR-BI-plus-1.75 にも： 取付説明書、ユーザーマニュアル、サービス (10 ページ), 取付説明書、ユーザーマニュアル、サービス (9 ページ)
ページを印刷する
ASKOHEAT+
User manual
D e v i c e i n t e g r a t i o n i n t o t h e l o c a l n e t w o r k
The connec on is made via a CAT5 or higher cable with a local network.
WLAN is not supported.
Normally, there should be a direct connec on to the router with DHCP server.
Powerline connec ons or WLAN bridges can cause unexpected problems and are not recommended.
(Support in these cases cannot be provided).
To synchronise the local clock in the ASKOHEAT+
on is necessary. Generally, the system also works without a LAN and / or internet connec on with significant
limita ons.
A er successful connec on, the middle LED (Connec on) flashes yellow / green (if there is no LAN
connec on, it flashes blue).
If only one ASKOHEAT+
window of a terminal connected to the LAN:
h
p://askoheat‐eth
h
p://askoheat.local
In networks with several ASKOHEAT+
the assigned IP address can be found in the router menu for most commercially available systems (the
devices are then iden fied by the name "askoheat" or, in excep onal cases, "espressif", iden fy some‐
mes only pa ent trial and error helps).
Example: 192.168.0.23 ‐> then enter this in the browser as follows: h
An IP scanner can also provide good service.
If the device website can be seen a er entering the IP address or the standard host na‐
mes, ASKOHEAT+
can be set up.
MV‐012‐6391.2
Insulated moun ng
Screw‐in heater R 1½"
for the user and qualified installer
is installed, it can be addressed with most routers as follows in a browser
or if the local host name resolu on does not (correctly) work,
01.04.2022
and to be able to carry out updates, an Internet connec‐
p://192.168.0.23
www.askoma.com
Page 6