- ページ 9
インターホン・システム ASL INTERCOM PS 279のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ASL INTERCOM PS 279 16 ページ。 Dual channel master station

8.0
INTERNAL CONTROLS
MIC GAIN
The setting of the mic gain must be done by qualified
service personnel only ! The mic gain is adjusted
internally.
-
To reach the mic gain, undo the two screws at
the front panel of the PS 279 and the two screws
on the top side.
-
The trimmer is located at the right front of the
unit.
-
To increase mic gain turn counter clockwise.
To decrease mic gain turn clockwise.
-
See section 7.1 for the location of the mic gain trimmer.
8.1
INTERNAL JUMPER SETTINGS AND CONTROLS
BINAURAL JUMPER SETTINGS
The setting of the binaural jumpers must be done by
qualified service personnel only !
See also section 5.16 HEADSET connector, an XLR-6
is a must for binaural operation.
The binaural configuration is set by internal jumpers J3,
as follows:
Jumpers in position A:
Left can
Right can
AUX signal.
Jumpers in position B:
Left can
Right can
Channel B and AUX signal
Internal mic gain
See also section 7.0 Internal controls.
The mic gain trimmer is labeled:
P2 for the mic gain setting.
User manual PS 279 / Issue 1 © 2006 ASL Intercom, Utrecht, The Netherlands
Channel A and B.
Channel A and AUX signal
9