- ページ 4

インターホン・システム ASL INTERCOM TS 99のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ASL INTERCOM TS 99 8 ページ。 Theater series cue light master station, cue light receiver, cue light preset control

ページを印刷する

4.0

FRONT PANEL CONTROLS

1 ATTENTION button

This push button activates the ATTENTION signal for

that specific channel. The large LED (3) will start

flashing in red on both the TS 120 and the TS 10

receiver. (If a receiver is not connected to the selected

channel the LED will extinguish)

2 GO button

This push button activates the GO signal for that

channel. It can only be activated when that channel

previously was in ATTENTION mode (LED 3 red

illuminated)

3 Indicator LED

This LED indicates the status of the channel.

When an ATTENTION has been given by pushing the

ATTN button (1) it will start flashing in red.

When the receiver acknowledges the reception of the

ATTENTION signal it will be lit red continuously.

When the GO signal is activated by pushing the GO

button (2) the LED will be lit green continuously.

When a TS 99 preset control is connected this LED

can flash green to show a preset preview or a preset

in program mode.

4 All selected channels GO button

This push button activates the GO function for all

selected channels.

A channel is selected when it is in ATTENTION mode

(red flashing) or when it is in ACKNOWLEDGE mode

(lit red continuously).

This way multiple channels can be switched from

ATTENTION to GO at the same moment.

5 CLEAR button

With this button all channels that are in GO mode (lit

green continuously) can be switched off in one action;

clearing the channels for the next action.

User Manual TS 120 / Issue 1

clear

All selected

channels

2000 ASL Intercom, Utrecht, Holland.