室内装飾品 AeroBed V36274のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AeroBed V36274 2 ページ。

Thank you for joining the AeroBed

family by purchasing one of our products. You can expect top-notch quality, innovation and imagination from every AeroBed

the comfort of an AeroBed

product. It is your responsibility to read and always follow the safety, care and maintenance instructions for your new AeroBed

solution and not intended for everyday use. Always instruct and supervise others on your bed's proper use, maintenance and safety.

SAVE THESE INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS

BEFORE USING THIS PRODUCT.

IMPORTANT SAFETY

INSTRUCTIONS AND WARNINGS

When using an electrical furnishing, basic precautions should always be followed.

Read all of the following instructions before using this furnishing.

When using an electrical furnishing, basic precautions should always be followed, including

the following: Read all instructions before using (this furnishing).

To reduce the risk of electric shock always unplug this furnishing from the electrical outlet

before cleaning.

To reduce the risk of burns, fire, electric shock, or injury to persons:

• Unplug pump before putting on or taking off parts.

• Close supervision is necessary when this furnishing is used near children or disabled persons.

• Use this furnishing only for its intended use as described in these instructions. Do not

use attachments not recommended by the manufacturer.

• Never operate this furnishing if the plug or card has been damaged, if it is not working

properly, if it has been dropped or damaged, or dropped into water. Contact the

manufacturer for assistance in these matters.

• Keep the cord away from heated surfaces.

• Never operate the furnishing with the air openings blocked. Keep the air openings free

of lint, hair, and the like.

• Never drop or insert any object into any opening.

• Do not use outdoors.

• Do not operate where aerosol spray products are being used or where oxygen is administered.

• To disconnect, place the knob in the OFF position, then remove plug from outlet.

• Warning - Risk of injury to Persons - do not use this furnishing to support video

equipment such as televisions or computer monitors.

• This pump includes a mechanism to protect against high temperatures. When the

primary pump runs for an extended period of time, it will automatically shut off to

avoid overheating. Allow the pump 30 minutes to cool down before next use.

• Maximum loads are as follows: Queen (600lbs - 272Kg), Full (600lbs - 272Kg), Twin

(300lbs - 136Kg).

SAVE THESE INSTRUCTIONS

• Product is for indoor use only. Do not use outdoors. For Household/Residential Use Only.

• This product has not been evaluated for flammability or cigarette ignition resistance.

• Use on flat surfaces only. Bed may tip over on uneven surfaces.

• Remove all sharp objects from area where bed will be set up and used. Do not use this

bed on abrasive surfaces or near pointed/sharp items or surfaces. Bed may puncture.

• Unplug product when not in use.

• Pump is not intended for extended periods of use longer than 8 hours. Pump may stop

working or overheat if it is used for extended periods of time.

• Do not attempt to disassemble, repair, or service the pump. No serviceable parts are contained

inside. Contact The Coleman Company, Inc. at 3600 North Hydraulic, Wichita, KS 67219,

1-800-835-3278 or TDD 1-316-832-8707 in the United States or Sunbeam Corporation

(Canada) Limited, DBA Jarden Consumer Solutions at 20B Hereford Street, Brampton ON L6Y

0M1, 1-800-387-6161 in Canada for repair and service center information.

SERVICING OF DOUBLE-INSULATED PRODUCTS

In a double-insulated product, two systems of insulation are provided instead of grounding.

No grounding means is provided on a double-insulated product, nor is a means for grounding

to be added to the product. Servicing a double-insulated product requires extreme care and

knowledge of the system, and is to be done only by qualified service personnel. Replacement

parts for a double-insulated product must be identical to the parts they replace.

INSTRUCTION MANUAL

DANGER

WARNING

INFLATION & ADJUSTMENTS

For better protection of this product never fold, unfold or inflate the airbed in temperatures

below freezing, avoid extensive exposure to the sun and protect from contact with sharp

objects and rough ground.

1. Place your rolled-up bed on the floor or other surface free of obstructions or sharp objects.

2. Make certain the Quick Air Release Valve is closed. If the release valve is open, close it by

using 2 thumbs to push cover and snap into valve. Be careful to avoid pushing valve cover

to the right or left as it snaps into the valve opening.

This is the closed position.

Open Air Release Valve.

3. Remove the AC plug and cord from the plastic bag and shrink wrap.

4. Before plugging the pump into the outlet, please confirm that the knob is in the "OFF" position.

5. Plug into any standard polarized 120 Volt AC electrical outlet. North American Electrical

rating: 120 VAC 60 Hz 1.7 A.

(Note: 230 VAC product sold outside of North America).

This product has a polarized attachment plug (one blade

is wider than the other) as a safety feature. This plug will

fit into a polarized outlet only one way. If the plug does not

fit fully in the outlet, reverse the plug. If it still does not fit,

contact a qualified electrician. Never use with an extension

cord unless the plug can be fully inserted. Do not attempt

to defeat this safety feature.

6. Select the desired firmness by rotating the knob on the pump to SOFT, MEDIUM, or FIRM.

The light next to the chosen setting will be illuminated to confirm successful selection.

The pump will inflate the mattress to the selected firmness setting and then shut off

automatically.

7. Once the desired firmness is reached, the pump will monitor mattress pressure and

quietly add air if the firmness drops below the selected setting. The mattress firmness is

maintained when the Comfort Lock light is illuminated. The product must remain plugged

into the electrical outlet for this feature to remain active throughout the night.

8. To change the firmness of your mattress, simply rotate the knob to the new desired

setting. The pump will immediately adjust the firmness to the new setting and maintain

that selected firmness throughout the night.

9. This product is designed to be used overnight to maintain the mattress at the selected

firmness setting. It is not designed to be in operation for extended periods of time. When

the bed is not in use, please turn the knob to the OFF setting and unplug the power cord

from the electrical outlet. This is a temporary bedding solution and is not intended for

everyday use.

USB CHARGING PORT

1. Your AeroBed

product includes a USB port built into the pump for charging your personal

device. Please adhere to the following guidelines to ensure proper usage.

2. In order to charge your personal device using the included USB port, the pump must

remain plugged into the electrical outlet.

3. Ensure that your charging cable is securely connected to the USB port on the pump and

also to the charging port of the mobile device.

4. Once your device is fully charged, please disconnect the charging cable from the USB port.

AUTOMATIC DEFLATION AND STORAGE

1. To deflate the mattress, simply rotate the knob to the DEFLATE position. The pump will immediately

begin to expel air and will automatically stop when the mattress is completely deflated.

2. For faster deflation, open the Quick Release Valve and allow air to expel. Then, for more

compact storage, close the valve and place the knob into the DEFLATE position. The pump

will expel the remaining air and will shut off automatically when the mattress is deflated.

3. Fold the sides of the bed into the center along its length. Open Quick Release Valve and

tightly roll the bed, pushing any remaining air out, close Quick Release Valve and place the

bed in the convenient carry bag for easy transport and storage.

4. Store your bed in a clean, dry place at room temperature (above 50 °F/10 °C). Storing your

bed under 50 °F (10 °C)

and over 100 °F (38 °C)

may affect its performance

and will not be covered

under warranty.

CL1000/RDV

product. You are about to enjoy

product. This is a temporary bedding

Close Valve using 2 thumbs.