- ページ 17
液晶テレビ Akura AHH20LCDのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Akura AHH20LCD 19 ページ。 20” lcd tv / monitor
ページを印刷する
st
1
Item: To adjust screen contrast.
nd
2
Item: To adjust screen brightness.
rd
3
Item: To adjust the sampling clock of the system for input signal.
th
4
Item: To adjust the sampling phase of the system for input signal.
th
5
Item: To adjust the horizontal position of the picture.
th
6
Item: To adjust the vertical position of the picture.
th
Item: To adjust local VGA color temperature value, which could be "C9300" or" C6500".
7
th
8
Item: It is used to carry out Auto Configure, When connected to a PC for the first time it is advisable to use
this setting.
th
9
Item: To carry out Auto Configure. Besides, it could resume customer data which is stored in the system.
4. . In the VGA mode you may adjust the V+/V- directly, it displays the
volume adjustment.
5.
P.S.:
1． The operation of remote keys and local keys in VGA menu is the same with the former relevant TV
operation.
2． We do not advise use of the 3
3． If only to carry out Auto Configure, it is better not to use this menu.
7 Television Installation
Connect antenna or video facility
1. Use a 75Ω coaxial cable plug to connect antenna to input terminal at the rear of the cabinet.
2. Connect external video apparatus to the audio, video in jacks or Scart socket at the rear of the cabinet.
VHF antenna
Mixer
，4
，5
，and 6
rd
th
th
UHF antenna
75
Co-axis cable
16
Antenna in jack
th
item to set screen state. It is better to use 9
Input terminal of antenna
Co-axis antenna plug
75
Co-axis cable
th
item.