- ページ 6

ツール Air & Allied Sales MP55AKのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Air & Allied Sales MP55AK 11 ページ。 Air nipper

・The exchange method of a main part A(①) piston(③) 　return spring(⑩)

(1) Intercept an air source of supply.

(2) Remove an air hose from a main part. (Refer to Fig. 1)

(3) Remove screw pin(⑥) and nut(⑮) and remove blades from a main part. (Refer to Fig. 2)

(4) Remove the main part C(22). (It turns to a clock and an opposite direction)

※Keep in mind that a piston may jump out at this time.

(5) Carry out a grease rise for the inside of the new main part A(①).

(6) Carry out the grease rise of the inside and O ring portion of new piston(③) (with　O ring(⑪)).

(7) Put new return spring(⑩) into the main part A.

(8) Put in new piston(③) which carried out the grease rise, fasten the main part C and complete.

※1．In exchange of the main part A, take the dirt of the existing piston(③),

carry out a grease rise at the inside of a piston, and O ring portion,

and include in the existing spring and (5).

2．In exchange of only a spring, please clean the existing main part A

and the existing piston finely, carry out a grease rise

and include in a required place with a new spring.

3．In exchange of only a piston, clean and grease rise the inside of the existing

main part A finely, and incorporate with the existing spring.

※Grease rise part

・The inside of main part A

※Recommendation lubricant (grease rise) ：　Shell Alvania Grease RA-J

　・The inside of a piston

6/11

Air & Allied Sales (Pacific) Pty Ltd

・Piston O ring portion