- ページ 2

Windows

Software Installation

®

Note

•

The screens below refer to Windows Vista™ operating system Ultimate Edition

(hereafter referred to as "Windows Vista") installation.

Screens may vary depending on the operating system you are using.

•

Log into a user account with the administrator privilege.

•

Before installing the software, disable all anti-virus programs and automatically

loading programs.

•

A message asking for your confirmation to restart your computer may appear

during the installation process. If this message is displayed, follow the on-screen

instructions and click OK.

The installation resumes from where it left off when your computer has been

restarted.

a

Be sure to TURN THE MACHINE OFF before continuing.

(1) Press the ON/OFF button.

(2) Make sure that the Power lamp stops flashing.

Turn the computer on and start Windows.

b

Important

If the Found New Hardware or Found New Hardware Wizard screen appears

automatically, remove the USB cable connected to your computer. Click Cancel

to quit the screen. In Windows Vista, the screen may close automatically when

the USB cable is unplugged. Then turn off the machine and proceed from step

c to install the software.

c

Insert the Setup CD-ROM. The setup program should run

automatically.

In Windows Vista, go to Step d. In Windows XP and Windows 2000, go to

Step f.

If the AutoPlay screen appears, click Run Msetup4.exe.

d

If the User Account Control screen appears, click Continue.

e

If the same screen reappears in subsequent steps, click

Continue.

f

When the main menu appears, click Easy Install.

The MP Drivers, On-screen Manuals, and application software are installed

automatically.

Note

If you want to select particular items to install, click Custom Install and follow the on-

screen instructions to proceed with the installation.

Part no. QT5-1005-V01 © 2007 Canon Inc. "Microsoft" is a registered trademark of Microsoft Corporation. "Windows" is a trademark of Microsoft Corporation, registered in the U.S. and other countries. "Windows Vista" is a trademark of Microsoft Corporation. "Macintosh" and "Mac" are trademarks of Apple Inc., registered in the U.S. and other countries.

g

When the list of software to install appears, confirm the

contents, click Install.

Note

Move the cursor over items to display explanations of each application.

h

Read the License Agreement carefully and click Yes. The

software installation screen may appear during the installation

process. Follow the on-screen instructions to install the

software.

When the Printer Connection screen appears, connect one

i

end of the USB cable to the computer and the other to the

machine, then TURN THE MACHINE ON. The MP Drivers will

begin identifying the printer port being used.

Important

If you cannot go to the next procedure after three minutes, refer to

"Troubleshooting" instructions in the User's Guide on-screen manual.

USB

To Computer

When the Print Head Alignment Recommended screen

j

appears, click Next.

k

When the Setup Complete screen appears, click Next.

When the User Registration screen appears, click Next.

l

Note

To register later, click Cancel and go to Step

m

. After software installation is

complete, double-click

on the desktop.

Follow on-screen instructions to register your product. You will need your

product serial number, which is located on the inside of the machine. See

Step 1-

on the front page.

j

When the PIXMA Extended Survey Program screen

m

appears, confirm the message. We would appreciate it if you

would take part in this program regarding the use of Canon

printers. If you can agree, click Agree.

When the Installation completed successfully screen

n

appears, click Exit.

If Restart is displayed, make sure that the Restart the system now

(recommended) check box is selected, then click Restart.

Note

If straight lines are misaligned or print quality is not satisfactory after installing the MP

Drivers, you may need to align the Print Head. Refer to "Aligning the Print Head" in the

Quick Start Guide.

Software installation is now complete.

Macintosh

Software Installation

®

Note

•

Since Mac

OS 9, Mac OS X Classic environments, or Mac OS X v.10.2.7 or earlier

®

are not supported, do not connect the machine to these.

•

The screens below refer to Mac OS X v.10.4.x installation. Screens may vary

depending on the operating system you are using.

•

Log on as an Administrator.

•

Before installing the software, disable all anti-virus programs and automatically

loading programs.

Connect one end of the USB cable to the computer and the

a

other to the machine.

Note

Make sure the machine is turned on.

USB

→

b

Turn on your Mac and insert the Setup CD-ROM.

Note

If the CD-ROM folder does not open automatically, double-click the CD-ROM icon

on the desktop.

c

Double-click the Setup icon.

When the Authenticate screen appears, enter your

d

administrator name and password. Click OK.

If you do not know your administrator name or password, click

, then follow the on-screen instructions.

e

When the main menu appears, click Easy Install.

The MP Drivers, On-screen Manuals, and application software are installed

automatically.

Note

If you want to select particular items to install, click Custom Install and follow the on-

screen instructions to proceed with the installation.

When the list of software to install appears, confirm the

f

contents, then click Install.

Note

Move the cursor over items to display explanations of each application.

g

Read the License Agreement carefully and click Yes. The

software installation screen may appear during the installation

process. Follow the on-screen instructions to install the

software.

h

When the Print Head Alignment Recommended screen

appears, click Next.

When the Setup Complete screen appears, click Next.

i

j

When the User Registration screen appears, click Next.

Note

To register later, click Cancel and go to Step

k

. After software installation is

complete, double-click

on the desktop.

Follow on-screen instructions to register your product. You will need your

product serial number, which is located on the inside of the machine. See

Step 1-

on the front page.

j

When the Installation completed successfully screen

k

appears, click Restart.

The system is restarted automatically.

When using Mac OS X v.10.2.8 to v.10.3.3:

Restarting the computer while connected to the machine may cause the

machine not to be detected. To resolve this, either unplug the USB cable

then plug it back in again, or turn the machine off then back on again.

Note

•

When using Mac OS X v.10.2.8 to v.10.3.x, before using the Operation Panel on

the machine to save originals scanned to the computer, it is necessary to select

MP Navigator EX 1.0 or MP Navigator EX 1 as the launch application on Image

Capture under Applications. For details, refer to "Scanning Images" in the User's

Guide on-screen manual.

•

If straight lines are misaligned or print quality is not satisfactory after installing the

MP Drivers, you may need to align the Print Head. Refer to "Aligning the Print Head"

in the Quick Start Guide.

Software installation is now complete.

XXXXXXXX

PRINTED IN VIETNAM