- ページ 11
オール・イン・ワン・プリンター Canon Color imageCLASS MF8350CdnのPDF スターターマニュアルをオンラインで閲覧またはダウンロードできます。Canon Color imageCLASS MF8350Cdn 33 ページ。 Canon imageclass mf8350cdn: quick start
Canon Color imageCLASS MF8350Cdn にも： スターターマニュアル (29 ページ), スターターマニュアル (28 ページ)
ページを印刷する
1
2
Preface
Installing the Machine
Use the numeric keys, and
then press [OK].
Current Time Settings
2010 01/01
12:52
AM
•
Move the cursor with [ ] or [ ].
•
Switch to <AM> or <PM> with [
Performing Color Correction
Color correction takes approximately 165
seconds.
Make sure that paper is
loaded, and then press [OK].
Supported paper:
Size: A4, LTR, 16K
Type: Plain 1/2, Rec
OK
Confirm the procedure for color
correction, and then press [OK].
Steps (Start:Press OK)
1. Print Adj. Image 1
2. Scan Adj. Image 1
A test chart (adjusted image 1) is printed.
Place the test chart with the print side face down.
Place the paper so that the black stripe is at the back side
of the machine.
Press [
] (Start).
Remove the test chart (adjusted image 1) placed on the platen glass in Step
3
Configuring and Connecting the Fax
Press [OK].
Adjust image to
reproduce original
color?
Yes
•
You can perform color correction by
selecting <Yes> to obtain optimum copy
results or printout results. For details
on the procedure, see the following
] or [
].
"Performing Color Correction."
Check the temperature of the installation site.
If the room temperature is low, correction may not be performed properly.
If <Adjustment failed.> appears
•
Is the paper loaded correctly?
→
Load plain paper or recycled paper of A4/Letter size in the paper cassette.
•
Is the test chart placed on the platen glass correctly?
→
Place the test chart with the print side face down and the black stripe toward the
back of the machine.
•
Has a paper jam occurred?
→
Remove the jammed paper.
If you want to perform color correction again, press [
select the following settings in the following order.
<Adjustment/Cleaning> → <Auto Gradation Adjustment> → <Copy Image
Adjustment>
Step 1
Printing adj. image 1.
Place adj. image 1 on
Step 2
the glass with black
Scanning adj. image 1.
side toward the back.
Press [Color] start.
4
Connecting to a Computer and
Installing the Drivers
No
Open the feeder.
Close the feeder.
Copy Image Adjustment
.
Appendix
An initial screen appears, and
initial setting is finished.
Copy: Press Start
1
100%
LTR
1
+ -
Density: 0
Original Type: Text...
2-Sided: Off
] (Menu), and then
9