- ページ 2

試験装置 AMERITRON ADL-2500のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AMERITRON ADL-2500 2 ページ。 2500 watts dry dummy load

ADL-2500 Dry Dummy Load

BEFORE USING YOUR ADL-2500 DUMMY LOAD, INSTALL THE FOUR (4)

RESISTORS FOUND IN THE SHIPPING CARTON !

INSTALLATION PROCEDURE

1. Remove the top cover.

2. CAREFULLY unwrap the resistors.

Note: The resistors are made of a fragile ceramic material--use caution when

handling.

3. Install the resistors into clips as shown in Figures 1 and 2 above. Hold the resistor in

the middle and press it firmly and evenly into its clip. Insert the middle resistors first.

4. Replace the cover noting the position of the connector identification on top.

TECHNICAL ASSISTANCE

If you have any problem with this unit first check the appropriate section of this manual.

If the manual does not reference your problem or your problem is not solved by reading

the manual you may call AMERITRON at 601-323-8211. You will be best helped if you

have your unit, manual and all information on your station handy so you can answer any

questions the technicians may ask.

You can also send questions by mail to AMERITRON, 116 Willow Road, Starkville, MS

39759 or by FAX to 601-323-6551. Send a complete description of your problem, an

explanation of exactly how you are using your unit, and a complete description of your

station.

Instruction Manual