- ページ 14
マルチメーター Ames Instruments 64014のPDF 取扱説明書と安全上のご注意をオンラインで閲覧またはダウンロードできます。Ames Instruments 64014 16 ページ。 Compact
ページを印刷するMaintenance and Servicing
procedures not specifically explained in this manual
must be performed only by a qualified technician.
cleaning, Maintenance, and Lubrication
1.
Wipe unit with a dry, lint-free cloth.
Do not use solvents or abrasives.
2.
Remove battery if not in
use for long periods.
Battery replacement
If the
sign appears on the Display,
the battery should be replaced.
1.
Power off Meter and
remove its Test Leads.
2.
Turn Meter over and remove screw
on back cover. Save the screw.
3.
Carefully remove battery cover and
tilt stand from back of Meter.
Fuse replacement
1.
Power off Meter and
remove Test Leads.
2.
Turn Meter over and remove screw
from back. Save the screw.
3.
Carefully remove battery cover and
tilt stand from back of meter.
Page 14
Screw
For technical questions, please call 1-888-866-5797.
3.
Store Meter in a dry location.
4.
Other than test leads, the battery, and
fuses, there are no replaceable parts
on this Meter. repairs should be
done by a qualified technician.
4.
Remove battery from the
battery compartment.
5.
Replace battery with the
same type and rating.
6.
Replace battery cover and tilt stand.
Fasten securely with saved screw.
note: Do not reverse the
polarity of the battery.
4.
Carefully pull the outside
cover off the Meter.
5.
Remove four screws from back cover,
one from each corner. Save screws.
One screw at
each corner.
Item 64014