- ページ 5

ラベルメーカー Astro Machine AstroJet M1CのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Astro Machine AstroJet M1C 6 ページ。
Astro Machine AstroJet M1C にも：クイック・リファレンス (2 ページ)

ページを印刷する

2. Carefully remove Printhead Cartridge from

foil packaging.

3. Carefully insert Cartridge into compartment at an

angle (as shown) [1], Once seated, gently tilt

Cartridge back until it snaps into position [2].

DO NOT FORCE Cartridge into position.

WARNING!

TO AVOID ELECTRICAL SHOCK OR SHORTING:

Before installing the Printhead, make sure

nozzles are hydrated and contacts are DRY!

4. Carefully insert Cartridge into compartment at an

angle (as shown) [1], Once seated, gently tilt

Cartridge back until it snaps into position [2].

DO NOT FORCE Cartridge into position.

TO AVOID ELECTRICAL SHOCK OR SHORTING:

Before installing the Printhead, make sure

nozzles are hydrated and contacts are DRY!

5. Open Print Engine Clamshell. Moisten

Printhead nozzles using distilled water and a

wet, lint-free cloth. Wipe end to end. (Gray strip

located below orange strip.) Close and latch

Print Engine Clamshell.

HOLD ONTO BOTH LATCHES WHEN OPENING

AND CLOSING PRINTHEAD CLAMSHELL TO

PREVENT DAMAGE.

DO NOT ALLOW CLAMSHELL TO DROP OR SLAM

CLOSED.

TO PREVENT DAMAGE TO INK LINES, A STOP

LIMITS RAISING CLAMSHELL MORE THAN 60°.

Page 5

WARNING!

CAUTION