- ページ 2

カメラレンズ Canon EF55-200mm f/4.5-5.6 II USMのPDF 使用方法をオンラインで閲覧またはダウンロードできます。Canon EF55-200mm f/4.5-5.6 II USM 2 ページ。 Ef zoom lenses
Canon EF55-200mm f/4.5-5.6 II USM にも：使用方法 (2 ページ), 使用方法 (2 ページ)

ページを印刷する

4. Hood

The lens hood can keep unwanted light out of the lens, and

also protects the lens from rain, snow, and dust.

Fit the hood to the hood mount, then turn it in the direction

of the arrow to attach it securely

❻

The hood can be reverse-mounted on the lens for storage

• Part of the picture may be blocked if the hood is not

attached properly.

• When attaching or detaching the hood, grasp the base of

the hood to turn it. To prevent deformation, do not grasp

the rim of the hood to turn it.

5. Filters

You can attach filters to the filter mounting thread on the

front of the lens.

• Use a polarizing Canon filter.

The lens length is measured from the mount surface to

the front end of the lens. Add 21.5 mm when including

the lens cap and dust cap.

The size and weight listed are for the lens only, except as

indicated.

Aperture settings are specified on the camera. The

camera automatically compensates for variations in the

aperture setting when the camera is zoomed in or out.

All data listed is measured according to Canon

standards.

Product specifications and appearance are subject to

change without notice.

Case and hood not provided with some models.

Filters sold separately.

Specifications

Diagonal

EF55-200mm f/4.5-5.6 USM

43°-12°

EF55-200mm f/4.5-5.6 II USM

43°-12°

EF80-200mm f/4.5-5.6 USM

30°-12°

EF75-300mm f/4-5.6 II USM

32°11'-8°15' 18°11'-4°35'

EF75-300mm f/4-5.6 III USM

32°11'-8°15' 18°11'-4°35'

EF90-300mm f/4.5-5.6 USM

27°-8°15'

CT1-7566-005

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions: (1) This device may

not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause

undesired operation.

Do not make any changes or modifications to the equipment

❼

unless otherwise specified in the instructions. If such changes

or modifications should be made, you could be required to stop

operation of the equipment.

This equipment has been tested and found to comply with the

limits for a class B digital device, pursuant to part 15 of the FCC

Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may

cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Consult the dealer or an experienced radio/TV technician for

help.

This Class B digital apparatus complies with Canadian ICES-003.

Angle of view

Lens

Minimum

construction

aperture

Vertical

Horizontal

25°-7°

36°-10°

13-13

22-27

25°-7°

36°-10°

13-13

22-27

17°-7°

25°-10°

7-10

22-27

27°-6°50'

9-13

32-45

27°-6°50'

9-13

32-45

15°10'-4°35' 22°40'-6°50'

9-13

38-45

Min. focusing

Max. magnification and field of view

distance

55 mm:0.06X/406 × 615 mm (16"×24.2")

1.2 m/3.94 ft

200 mm:0.21X/112 × 166 mm (4.4"×6.5")

55 mm:0.06X/406 × 615 mm (16"×24.2")

1.2 m/3.94 ft

200 mm:0.21X/112 × 166 mm (4.4"×6.5")

80 mm:0.07X/366 × 546 mm (14.4"×21.5")

1.5 m/4.92 ft

200 mm:0.16X/153 × 226 mm (6"×8.9")

75 mm:0.07X/372 × 558 mm (14.6"×22")

1.5 m/4.92 ft

300 mm:0.25X/95 × 142 mm (3.7"×5.6")

75 mm:0.07X/372 × 558 mm (14.6"×22")

1.5 m/4.92 ft

300 mm:0.25X/95 × 142 mm (3.7"×5.6")

90 mm:0.08X/311 × 464 mm (12.2"×19.4")

1.5 m/4.92 ft

300 mm:0.25X/95 × 141 mm (3.7"×5.6")

❻

●

❼

●

Max. diameter

Filter diameter

and length

70.4 × 97.3 mm

52 mm

(2.8"×3.8")

70.4 × 97.3 mm

52 mm

(2.8"×3.8")

69 × 78.5 mm

52 mm

(2.7"×3.1")

71 × 122.1 mm

58 mm

(2.8"×4.8")

71 × 122 mm

58 mm

(2.8"×4.8")

71 × 114.7 mm

58 mm

(2.8"×4.5")

Weight

Hood

Case

310 g/10.9 oz

ET-54

LP1016

310 g/10.9 oz

ET-54

LP1016

260 g/9.1 oz

ET-54

LP1014

495 g/17.3 oz

ET-60

LP1019

480 g/16.8 oz

ET-60

LP1019

420 g/14.8 oz

ET-60

LP1019

2010.6