- ページ 13
ネットワーク・ハードウェア ASTRON UniBoard2のPDF マニュアルをオンラインで閲覧またはダウンロードできます。ASTRON UniBoard2 16 ページ。
ページを印刷するIn the following subsections debug functions are described. The basic functions are described in [RD-5].
11.2.1 Version
With 'v' the version of the software and the chip can be readout. On the bottom of the version the mapping of
the switch ports to FPGA and copper ports are shown, where "ll" stands for lower left RJ45 port, "ul" for
upper left, "lr" for lower left and "ur" for the upper left port.
The result will look like:
UniBoard2 0.4
UniBoard2
Length Jumbo:
Chip id: 273890e9
PRT0 PRT1 PRT2 PRT3 PRT4 PRT5 PRT6 PRT7 PRT8 PRT9 PRT10 PRT11 PRT12 PRT13
N0-0 N0-1 N1-0 N1-1 N2-0 N2-1 N3-0 N3-1 C ll C ul C lm
11.2.2 Status
With 's' the status of the switch can be readout. This will plot the status of the port and the number of
transmitted and received octets since the last read out. The result will look like:
11.2.3 Reboot
With 'b' the switch can be rebooted.
11.3 Power Readout
2
On Uniboard
digital power Point of loads are placed. This will enable readout of the power consumption per
regulator. This can be done by the FPGA, but for debugging an Ericsson controller and software can be used
to readout and adjust the converters. For this a header is placed close to every FPGA, see Figure 9.
UniBoard
13 / 16
9600
Port Status
0
Port Up
1
Port Down
2
Port Up
3
Port Down
4
Port Up
5
Port Down
6
Port Up
7
Port Down
8
Port Down
9
Port Up
10
Port Down
11
Port Down
12
Port Down
13
Port Down
2
Manual
RXOCT
TXOCT
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
Doc.nr.:
Rev.:0.1
DESP
Date:11/05/2015
Class.:
C um
C lr
C ur
ASTRON-IS-036 1.0