- ページ 13

ソフトウェア Canon CP-10のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Canon CP-10 35 ページ。 Card photo printer
Canon CP-10 にも：仕様 (2 ページ)

Proper Usage and Handling

Usage Location

• Do not use near strong magnets or near

devices that produce strong electromagnetic

fields.

Electromagnetic radiation from devices such as

TVs and game machines, and strong magnetic

fields from devices such as speakers and large

motors, may cause distortion in printed images.

• Use in a well-ventilated area.

• Leave about 10 cm (4 in.) of clearance around

the printer. Be sure to leave clearance around

the paper handling slot (at the rear) so that

paper has sufficient room to jut out from the

slot during printing.

Handling Precautions

• Never use volatile compounds or insecticides

on the printer, and do not allow rubber or vinyl

material to remain in prolonged contact with

the printer.

These materials may cause deformation of the

printer's casing.

• Unplug the printer when you are not using it.

But please note that you should plug in and run

the printer at least once every six months to

ensure that it remains functional.

• Before transporting the printer, remove the

paper and ink cassettes and close the paper

cassette cover and the ink cassette cover.

• Pack the printer into an appropriate case for

transport. If a case is not available, wrap it with

cloth or other protective material to protect

against scratches.

Overheating

If the printer overheats, it will temporarily stop

operating. This does not mean that the printer

has malfunctioned. The printer will resume

normal printing as soon as it cools down.

Temporary stoppages are most likely to occur

in the following cases:

• When printing continuously.

• If the room is unusually warm.

• If the air vents are blocked or if ventilation is

inadequate.