- ページ 16

マザーボード Asus AT5IONT-I DELUXEのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Asus AT5IONT-I DELUXE 47 ページ。 At5iont-i series user's manual
Asus AT5IONT-I DELUXE にも：クイック・スタート・マニュアル (12 ページ)

ページを印刷する

Keyboard/mouse power and USB device wake-up (3-pin PS2_USBPW1-4)

This jumper allows you to enable or disable the keyboard/mouse and USB port 1-4

wake-up feature. When you set this jumper to pins 2-3 (+5VSB), you can wake up

the computer by pressing a key on the keyboard, clicking the mouse or using a USB

device. This feature requires an ATX power supply that can supply at least 1A on the

+5VSB lead, and a corresponding setting in the BIOS. The USBPW1-4 jumper is for

the rear USB ports.

AT5IONT-I DELUXE PS2 Keyboard/Mouse power setting

and USB device wake-up

The total current consumed must NOT exceed the power supply capability (+5VSB)

whether under normal condition or in sleep mode.

USB device wake-up (3-pin USBPW56)

Set this jumper to +5V to wake up the computer from S1 sleep mode (CPU stopped,

DRAM refreshed, system running in low power mode) using the connected USB

devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU,

DRAM in slow refresh, power supply in reduced power mode).

AT5IONT-I DELUXE USB Device Wake-up

• The USB device wake-up feature requires a power supply that can provide 500mA on

the +5VSB lead for each USB port; otherwise, the system would not power up.

• The total current consumed must NOT exceed the power supply capability (+5VSB)

whether under normal condition or in sleep mode.

1-7

PS2_USBPW1-4

2 3

+5VSB

+5V

(Default)

USBPW56

+5VSB

+5V

(Default)

Chapter 1: Product introduction