- ページ 9

カーエレクトロニクス AL Guardian G9 RXのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AL Guardian G9 RX 20 ページ。

3. Installation

To obtain the best performance of your AL G9 and insure long service life, seek a professional installer to

mount the product. To begin installation follow these steps and refer to the Installation diagram.

OUTER SENSOR

Can be mounted between the front grill partitions or above the rear bumper. Take care not to damage the

cable or the factory installed connector on the cable during installation (cutting the cable or removing the

factory installed connector voids warranty and may cause malfunction).

Check if the cable is long enough to reach the desired position. The RX s

connected with a connecting cable (4 meters). A t

range can be achieved by adding an Extension cable (2,5 meters, purchased separately).

To achieve maximum water resistance put a heat shrink tube (included) on the connector. Use a

strong heater for the tube to shrink and conform to connector size.

the sensor requires disconnection.

Heat shrink tube provides

total humidity protection.

We strongly advise you

to use it.

ensor cable (1 meter) is to be

otal of 5 meters in lenght can be reached. Longer

The tube can be torn apart when

OPTION: 2,5 m Extension cable

AL G9 User Guide

arrow to arrow