- ページ 32

メディア・コンバーター Baumer Hubner HMC16 SeriesのPDF 取付・取扱説明書をオンラインで閲覧またはダウンロードできます。Baumer Hubner HMC16 Series 44 ページ。 Encoder without bearings - incremental

ページを印刷する
Baumer Hubner HMC16 Series 取付・取扱説明書
SETTINGS HMCP16 / ADjUSTMENT OF THE ENVELOPE DELAy TIME OF THE FILTER
7.5

Adjustment of the envelope delay time of the filter

Adjustment of the envelope delay time of the filter (pin header 1)
The factory setting and ordered value for the envelope delay time of the filter can be set
in 3 different values via jumper positions on the pin header on the electronic board, see
section 7.2.1
Jumper position envelope delay time of the filter in µs, marked shows example of
section
6.2.6�
0
176
704
= Factory setting
7.6
Adjustment to skeleton operation
Only input 1 will be evaluated (pin header 2)�
At systems with multiple sensing (two inputs) you can switch off the second input�
Both inputs will be evaluated
(factory setting)
28/40
or
section
7.2.2�
y
1
2
304
560
1216
2240
3
0
1072
x
1
4288
Only input 1 will be evaluated
MB168T1EN - 11184527, 19A2, Baumer_HMC16-T1_II_EN