- ページ 10

ヘッドセット Amplicomms BTH 1400のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Amplicomms BTH 1400 18 ページ。

PERATION

The MIC button

The microphone opening at the lower part of the receiver front picks up the

sounds of your surroundings. When the microphone is switched on, you

will hear your surroundings louder. You can hear for example your door

bell, your telephone or your conversational partner even when you are

wearing the receiver.

Press the MIC button to switch the microphone on. The power on indicator

will turn to green and one short beeps is to be heard. Make sure that the

microphone opening is not covered!

You can hear your surroundings and you use the receiver as an assistive lis-

tening device which helps you to better hear other people.

Press the MIC button again to switch off the microphone. The power on

indicator will return to blue and two short beeps are to be heard.

Caution: When switching between the microphone and music source please

be aware that the volume level can change substantially dependant upon

signal input levels. As a precaution the volume level should be lowered

prior to switching between the microphone and music.

The PHONE button

Do you have your receiver connected to a mobile phone / smartphone, you

can answer or end a phone call by briefly pressing the phone button. When

an incoming call is received the ringing tone from the mobile phone will be

transmitted to the headset which in turn will be heard in the earpieces.

Press and release the 'Phone' button on the BTH1400 and then you can con-

verse with the caller. The microphone in the headset will pick up your voice.

To end the call simply press and release the 'Phone' button again.

Helpline UK 0844 800 6503

(See page 25 for costs and hours of operation)