- ページ 12

試験装置 Amprobe ACD-14 TRMS-PLUSのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Amprobe ACD-14 TRMS-PLUS 16 ページ。 Tech clamp

Battery replacement

The meter uses 2 standard 3V alkaline button batteries (ANSI/NEDA-5004LC,

IEC-CR2030).

The lower battery is used for the slide-switch functions, and the upper battery is used

for the upper display ACA function separately.

Low Battery Indication: When the battery voltage drops below approx. 2.4V, a battery

symbol will appear in the upper right corner of the LCD display, indicating that the

battery needs replacing.

To replace the batteries, loosen the two screws from the case bottom and remove the

bottom case. Slide the battery out the side of the holder (see example below) and

replace with a new battery (observe polarity). Replace the bottom case. Note: Take

care to insure that the two (2) springs (located near the lower battery) line up with the

speaker in the rear cover.

Re-fasten the screws.