- ページ 5

録音機器 Amptone Lab XY MIDIpadのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Amptone Lab XY MIDIpad 12 ページ。 Xy midipad midi controller user's manual

Use a milling machine to mill out two cavities. First one's

measurements are 112mm x 93.5mm and 2mm depth,

while the second one's are 103mm x 84mm and minimal

depth of 16mm. Detailed draft can be found on the next

page (you can also download it at

www.amptonelab.com/files/XY_MIDIpad_cavity.pdf).

After milling, drill holes for each element of the controller –

button, encoder, MIDI socket and on/off switch. These

elements can be placed anywhere on the guitar body.

The next step is mounting the microcontroller inside the

guitar under the touch screen using two screws from the

kit. The microcontroller has to be placed so the LED is in

the middle of the touch screen and the cables coming from

the microcontroller are turned in opposite direction to your

guitar potentiometers.

Then you can mount button, encoder, on/off switch and

MIDI socket (using two included screws).

After mounting all elements you need to connect their

cables to the microcontroller. Then attach touch screen

ribbon to the connector on the microcontroller, with white

rectangle on the ribbon pointed downwards. Place the

white plastic surface beneath the touch screen.

You can now begin mounting the touch screen frame. Drill

four holes for the screws and mount the frame. Then put

the battery into the clip – XY MIDIpad is now ready to use.