- ページ 4

ミュージックペダル Amptweaker Bass tight fuzzのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Amptweaker Bass tight fuzz 4 ページ。

Other Tips & Tricks:

• Effects like compressors, treble boosters, octavers, or

overdrives tend to work best in the Effects Loop, set to Pre.

• Effects like EQ, chorus, vibe, delay, reverb and most other

mod effects tend to sound best with the Loop set to Post.

• Add an overdrive/distortion pedal in the Effects Loop (set to

Pre) to tweak the Bass TightFuzz for more distortion and

sustain! The Dry Low will blend in the low part of the drive.

• Add a clean boost or EQ pedal in the Effects Loop (set to

Post) for more output level or to further tweak the fuzz tone.

• With higher Volume/lower Fuzz settings, the Bass TightFuzz

sounds like a small tube amp(with Tight DOWN, 70ʼs tone,

Smooth ON) or a treble booster(with Tight UP, 60ʼs tone).

• For the thickest, buzziest fuzz, use Silicon, 70ʼs, Edge OFF,

Fuzz turned UP and Tight turned DOWN. Dry Low to taste.

• Select Pre/Effects Send to use it as a switchable ʻcleanʼ

send to another effects chain, tuner input or second amp.

• Select Post/Effects Send to send to another amp AFTER

the Bass TightFuzz for a big stereo solo tone.

• When using extremely high settings on the Tight control,

you will likely need to increase your the Dry Low control.

Amptweaker, LLC

5885 Cumming Hwy, Suite 108-98

Sugar Hill, GA 30518

good tone comes from tweaking . . .

handmade in USA