- ページ 14

食器洗い機 Bosch Ascenta SHE4AM12UのPDF 修理指示をオンラインで閲覧またはダウンロードできます。Bosch Ascenta SHE4AM12U 50 ページ。
Bosch Ascenta SHE4AM12U にも：修理指導 (27 ページ)

4.6

Float

The float is a safety device which starts the drain pump if there's

too much water in the tank.

4.7

Unlike prior dishwashers, Ascenta dishwashers use a common

water inlet and condensation system. Instead of feeding water

into the bottom of the tank, dishwashers fill into the left side of the

tank. Instead of condensation exiting from the right side of the

tank, it exits the left side of the tank through the water inlet.

There are three hoses connected to the water inlet system, the

water inlet hose (from the water inlet valve), condensation

(breather) hose and internal drain hose. The internal drain hose

has a factory made high loop (~ 15" above the floor) and

connects to the external customer drain hose.

Ascenta dishwashers use a time-fill.

702_58300000130262_ara_en_c

1. Float assy.

2. Float (located inside

of tank)

Maximum customer (external) drain hose length is 92".

Water inlet system and hoses are shown below.

1. Condensation tube

2. Drain hose (with high loop)

3. Water inlet hose

4. Water inlet

Drain hose high loop and left side condensation exit are shown

below.

Page 14 of 50