- ページ 16

食器洗い機 Bosch Ascenta SHE4AM12UのPDF 修理指示をオンラインで閲覧またはダウンロードできます。Bosch Ascenta SHE4AM12U 50 ページ。
Bosch Ascenta SHE4AM12U にも：修理指導 (27 ページ)

4.10

Aqua sensor

The aqua sensor is located above the drain pump. It's a one-

piece assembly, not a small circuit board pulled out of a plastic

housing. It senses water cleanliness and allows the dishwasher

control to determine removing cycles to save energy.

If water is clean enough, it will be kept for the wash cycle. If not,

the aqua sensor directs the dishwasher to add an additional pre-

rinse or pre-wash cycle.

Dishwashers still operate adequately if aqua sensors fail.

Customers with lightly soiled or pre-rinsed dishes may notice

wash cycles lasting slightly longer.

702_58300000130262_ara_en_c

1. Aqua sensor

2. Sump

3. Drain pump port

4. Heat pump

4.11

Ascenta dishwashers use a two-hose (internal / external) drain

hose system. A 92" long external drain hose is connected (during

installation) to the internal drain hose, with the 90º elbow pointing

toward the customer drain. The external drain hose connects

directly to the customer drain system without an adapter.

The 90º elbow in the hose should be pointed toward the

dishwasher drain connection.

The internal drain hose is held in place at the sump exit by a

white plastic hose lock (1).

Page 16 of 50