- ページ 23

食器洗い機 Bosch DISHWASHERのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Bosch DISHWASHER 40 ページ。 Dishwasher bosch
Bosch DISHWASHER にも： 取扱説明書 (30 ページ), 取付説明書 (34 ページ), 取扱説明書 (30 ページ), 取扱説明書 (28 ページ), 取扱説明書 (30 ページ), 取扱説明書 (38 ページ), 取扱説明書 (42 ページ), 取扱説明書 (32 ページ), 取扱説明書 (36 ページ), 取扱説明書 (30 ページ), 取扱説明書 (24 ページ), 取扱説明書 (26 ページ), 取扱説明書 (28 ページ), 取扱説明書 (29 ページ), 取扱説明書 (28 ページ), 取扱説明書 (28 ページ), 取扱説明書 (28 ページ), 取付説明書 (50 ページ), 取付説明書 (20 ページ), 操作方法 (24 ページ), 操作説明 (36 ページ), 取扱説明書 (25 ページ), 取扱説明書 (46 ページ), 取扱説明書 (31 ページ)

ページを印刷する
Bosch DISHWASHER 取扱説明書
Within an option/basic setting there are
several possible settings that can be
selected using the buttons – or +
A selected setting is applied by
changing to the next option/basic
setting using the button M/OK
If a setting has been changed using
the buttons – or + and stored using
M/OK
, the message "Value Stored"
2
will be displayed and the display returns
to the Main Menu.

Timer programming

You can delay the programme start by
24 hours in steps of
If the option "Time Pre-select" is
chosen the display shows "Delay start:
00 mins".
Set the desired time.
Return to the Main Menu by pressing
M/OK
and start the required
2
programme by pressing the Start Button
.
4
Close the door. This starts the time
counting backwards.
When the set time has elapsed the
programme will start automatically.
Until the programme starts you are able
to change the set time and programme.
To do this, use the button –
return to the Main Menu and change
the settings. Then start the programme
again.
In order to delete the pre-selected time,
set the time back to "Delay start:
00 mins".
.
3
.
2
minutes.
to
3
Remote Control**
After choosing the option "Remote
Control" the display will show "Remote
Control: Off" (factory setting)
You activate this option by selecting
"Remote Control: On".
** Only with installed serve@Home
interface

Reduce Time

The Auto Programmes allow you to reduce
the run time of the programmes. However,
in order to achieve an optimal cleaning
result, the water and energy consumption
will be increased.
If the option "Reduce time" is chosen
the display shows "Reduce time: Off"
(factory setting).
Select "Reduce time: On".
Return to the Main Menu by pressing
M/OK
and start the required
2
programme by pressing the Start Button
.
4
If you do not want to use "Reduce
time" the next time you use the
dishwasher, you must deselect this
option.

Drying Level

If the option "Drying Level" is chosen
the display shows "Normal drying"
(factory setting).
Alternatively you can select "Eco
drying" or "Extra drying".
The option "Extra drying" increases
the temperature during rinsing in all
programmes. (Please take care with
delicate dishes.)
en
23