- ページ 6

食器洗い機 Bosch DISHWASHERのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Bosch DISHWASHER 28 ページ。 Dishwasher bosch
Bosch DISHWASHER にも：取扱説明書 (30 ページ), 取付説明書 (34 ページ), 取扱説明書 (30 ページ), 取扱説明書 (28 ページ), 取扱説明書 (30 ページ), 取扱説明書 (38 ページ), 取扱説明書 (42 ページ), 取扱説明書 (32 ページ), 取扱説明書 (36 ページ), 取扱説明書 (30 ページ), 取扱説明書 (24 ページ), 取扱説明書 (26 ページ), 取扱説明書 (40 ページ), 取扱説明書 (28 ページ), 取扱説明書 (29 ページ), 取扱説明書 (28 ページ), 取扱説明書 (28 ページ), 取付説明書 (50 ページ), 取付説明書 (20 ページ), 操作方法 (24 ページ), 操作説明 (36 ページ), 取扱説明書 (25 ページ), 取扱説明書 (46 ページ), 取扱説明書 (31 ページ)

ページを印刷する

Water softening system

To ensure good washing results, the

dishwasher requires soft water, i.e.

containing low amounts of lime, otherwise

white limescale will be deposited on the

utensils and inner container.

Tap water above 9° Clarke must be

softened. The water is softened with salt

(regeneration salt) in the water softening

system of the dishwasher.

The setting and therefore the required

amount of salt depends on the degree of

hardness of your tap water (see table).

Setting

The amount of salt dispensed can be set

from

to .

Sal is not required at the set value .

– Find out about the hardness

value of your tap water. Your water

utility company will help you with this.

– Set value can be found in the water

hardness table.

– Close the door.

– Hold down programme button +

and switch on the main switch (.

– Release both buttons.

The LED for button + flashes

and the digital display 8 displays

the factory setting .

To change the setting:

– Press programme button +.

Each time the button is pressed,

the set value increases by one level;

when the value of

the display jumps back to

– Switch off the main switch (

The chosen setting has now been

stored.

has been reached,

(off).

Water hardness table

:DWHU

+DUGQHVV

KDUGQHVV

UDQJH

YDOXH

&ODUNH

VRIW

PHGLXP

KDUG

PPROO

6HW YDOXHâRQâ

WKHâPDFKLQH