- ページ 2

スピーカー Anchor ACCLAIMのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Anchor ACCLAIM 4 ページ。 Portable lectern sound system

Anchor ACCLAIM オーナーズマニュアル
A MESSAGE FROM THE OWNER
Thank you for choosing an Anchor Audio portable sound system. Our products incorporate state-of-the-art design and the finest quality of ma-
terials and workmanship. We're proud of our products and appreciate the confidence which you have shown by selecting an Anchor system.
I hope you'll take a few minutes to review this manual. We've incorporated several unique features into our products, and your knowledge of
how to use them will enhance the performance and your enjoyment of the system.
Janet Jacobs – President
on behalf of all Anchor Employees

GETTING STARTED

Please check your new unit carefully for any damage which may have occurred during shipment. Each Anchor product is carefully inspected at
the factory and packed in specially designed boxes for safe transport.
Notify the freight carrier immediately of any damage to the shipping box or product. Repack the unit in the original box and wait for inspection
by the carrier's claim agent. Notify your dealer of the pending freight claim.
NOTE: All damage claims must be made with freight carrier!
RETURNING SYSTEMS FOR SERVICE OR REPAIR
For service or repair, please contact the dealer you purchased your system from or Anchor Audio Customer Service at (888) 444-6077 to obtain a
RA (Return Authorization) number. All shipments to Anchor Audio must include an RA number and must be shipped prepaid. C.O.D. shipments
will be refused and returned at your expense.
IMpORTANT: Save the shipping box & packing materials,
they were specially designed to ship your unit!
WARRANTY REGISTRATION
Visit our website at www.anchoraudio.com and select "Warranty Registration". Complete the online form to activate the six-year limited war-
ranty on your Acclaim lectern sound system and two-year limited warranty for microphones.
CERTIFICATION
This system conforms to part 74 and part 15 of the FCC rules, contact the FCC office for filling forms.
Frequency Range: 682 MHz - 698 MHz
WH-6000EU and WB-6000EU transmitters meet the essential requirements of the European R&TTE Directive
99/5/EC and are eligible to carry the CE marking. CE 0336 !
European Frequency Range: 863.125 MHz - 864.875 MHz
2
OpERATING THE WIRELESS MICROpHONE / TRANSMITTER
CHANNEL SELECTION - HANDHELD TRANSMITTER
1. Unscrew battery cover on bottom of microphone
2. Set the CHANNEL SELECTOR dial to match the
channel setting of your receiver
3. Replace battery cover and tighten firmly
NOTE: When using dual wireless, each microphone must be set to a different channel!
USING YOUR WIRELESS MICROpHONES
After you have set the transmitter channel (see above) you are ready to use your wireless microphone:
1. Body-pack transmitter users must insert the mic
plug into the transmitter jack marked MIC
2. Turn the transmitter power switch to ON
(The red LED will flash when the mic is turned on.
If the red LED stays on, the battery is low)
CAUTION: Harmful feedback may occur when walking in front of a sound system or speaker with
a wireless microphone. Always point microphone away from speakers!
REPLACE BATTERY - HANDHELD TRANSMITTER
1. Unscrew battery cover on bottom of microphone
2. Replace old batteries with 2 fresh size 'AA'
alkaline batteries
3. Replace battery cover and tighten firmly
NOTE: Transmitter power must be OFF when changing batteries!
CHANNEL SELECTION - BODY-PACK TRANSMITTER
1. The channel selection dial is located on the
side of the transmitter
2. Set the CHANNEL selection dial to match
the channel setting of the receiver
3. Turn the Acclaim power switch to ON
4. The RX indicators will light (only one indicator
will light at a time) when the wireless signal is
being transmitted and received
REPLACE BATTERY - BODY-PACK TRANSMITTER
1. Slide open battery cover on front of transmitter
2. Replace old batteries with 2 fresh size 'AA'
alkaline batteries
3. Replace battery cover by sliding firmly into place
7