- ページ 8

ヒーター Dreamland N3907のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Dreamland N3907 12 ページ。 Intelliheat easy fit heated underblanket
Dreamland N3907 にも： 取扱説明書 (12 ページ), 取扱説明書 (12 ページ)

ページを印刷する
Dreamland N3907 取扱説明書
DISCONNECT: To disconnect your electric blanket from the mains socket, switch the control to OFF
position on the back of your Intelliheat control (O) (18) (Diagram [D]), and then safely disconnect the plug
EN
from the mains socket (9) (Diagram [B]).
Your electric blanket is suitable for washing. Check the washing instructions on the label of your
underblanket to wash it correctly.
WARNING! Always disconnect the appliance from the mains
supply before cleaning or performing maintenance.
BEFORE WASHING OR STORING YOUR BLANKET:
1.
Disconnect the control from the mains socket.
2.
Disconnect the connector (2) from the blanket by pressing the push buttons at the sides of the control
connector (1).
3.
Ensure that the controls are not connected and none of the wires have worn through the fabric.
4.
It is important to measure the underblanket before washing and check that the dimensions are
approximately the same before drying.
MACHINE WASHING
•
The underblanket can be machine washed at 40°C on a wool programme.
•
Only the gentle spin cycle is to be used. DO NOT use an extra spin cycle.
TUMBLE DRYING
•
Tumble dry at a low temperature.
•
DO NOT use the underblanket until it is completely dry.
HANGING THE ELECTRIC BLANKET OUTSIDE TO DRY
•
The underblanket must be stretched back to approximately its original size during the drying
process. This is best done whilst damp, working from side to side, stretching a piece at a time. This
procedure may need to be repeated a few times until fully dry.
•
Make sure the wires are not kinked or twisted. It is easier to check the wires by placing the electric
blanket against the light.
•
If problems arise with the wires after having dryed the electric blanket or if it does not return to its
original size, return it to our authorised Service Centre for a safety check.
WARNING! Examine the appliance against the light to make
sure the cables are not bent or twisted.
WARNING! If the appliance does not resume its original size or
if problems arise with the internal cables contact an authorised
service centre for a safety check.
WARNING! Hang the appliance without applying pegs so as not
to damage it.
6
MI002683_N39.indd 6

CLEANING AND MAINTENANCE

30/03/17 16:04