- ページ 11

冷凍庫 Electrolux ARCTIS 70258 GSのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Electrolux ARCTIS 70258 GS 20 ページ。 Electrolux freezer

Temperature setting buttons

The temperature is adjusted using the „B" and „D" buttons. These buttons

are connected to the temperature display.

• The temperature display is switched over from the display of the ACTUAL

temperature (Temperature display is illuminated) to the display of the

DESIRED temperature (Temperature display flashes) by pressing one of the

two buttons, „B" or „D".

• Each time one of the two buttons is pressed again the DESIRED

temperature is adjusted by 1 °C. The DESIRED temperature must be

reached within 24 hours.

If neither button is pressed, the temperature display automatically switches

back after a short period (approx. 5 sec.) to the display of the ACTUAL

temperature.

DESIRED temperature means:

The temperature that has been selected for inside the freezer. The DESIRED

temperature is indicated by flashing numbers.

ACTUAL temperature means:

The temperature display indicates the current temperature inside the freezer.

The ACTUAL temperature is indicated with illuminated numbers.

Temperature Adjustment

Press either the „+" (WARMER) or „-" (COLDER) button.

The temperature display switches over and the DESIRED temperature

currently set flashes on the temperature display.

To adjust to a warmer temperature, press the „+" (WARMER) button. To

adjust to a colder temperature, press the „-" (COLDER) button. The changed

setting is immediately displayed on the temperature display. Each time one

of the two buttons is pressed again the DESIRED temperature is adjusted by

1 °C.

The following DESIRED temperature settings are possible:

• Operating mode "Freezing": from -15 °C up to -24 °C in 1 °C steps;

If the buttons are not pressed again the temperature display will change

after approx. 5 seconds from the DESIRED temperature to the ACTUAL

temperature. The display changes from flashing to illuminated numbers.

Important! Please check red warning display and temperature display

regularly to assure maintenance of the storage temperature.(see the chapter

"Temperature Adjustment").