- ページ 8

配管製品 Dreamline ENIGMA-Z SHDR-62607610 SeriesのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Dreamline ENIGMA-Z SHDR-62607610 Series 20 ページ。 Shower door & tub door

Measure the distance between the two finished

walls at the top, middle and bottom. This distance is

marked as "W".

Also check the threshold for level and the walls for

plumb.

Use the "W" dimension at the model height to cut the

Upper Guide rail (#03) to size for your opening.

Note: The minimum threshold requirement for

the ENIGMA-Z is 2-3/8" of flat threshold space.

The Upper Guide rail (#03) has been precut for

your model width of: 48" or 60" (Please Note: the actual

rail is shorter than the model width by design).

You will need to cut the Upper Guide rail (#03) from

the door end which is farther from the Glass bracket

(#07) holes.

The length to cut off will be L:

Model Width – opening W = cut off length L

If your model width is 48" and your finished opening is

46", then you will need to cut 2" off of the rail from the

door end.

Example: 48"– 46" = 2" cut off

ENIGMA-Z manual Ver 1 Rev 4 10/2016

Installation steps

See Fig. 1 for details

2-3/8"

minimum

threshold

See Fig. 2 for details

Top

Middle

Bottom

Fig. 1

glass bracket

holes

Fig. 2

door end