- ページ 6

オーブン ANDI PYROLYTIC AX100 MTPCのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。ANDI PYROLYTIC AX100 MTPC 12 ページ。 Electric built-in oven 60 cm

ページを印刷する

1. Control Panel

Setting:

Select a function by pressing the function button and set the required time with

+/-

Buttons:

Pressing the

button increases the time set, pressing

longer the button is held in the appropriate position.

Setting Time of Day:

Select Time of day function by keeping

buttons. Any programme, which has been set, is cancelled and the outputs switched on.

Manual Operation:

On six buttons Elect. Programmer just press the

Programmer press

and

cookpot symbol

will come on. On both cases any programme, which has been set, is cancelled.

Semi-Automatic Operation with cooking duration:

Select

function and set required end time with the

The relay output becomes active. If time of day = cooking end time the relay output and the cookpot symbol are

switched off. The audible signal sounds and

Fully Automatic Operation:

Select

function and set required duration with the

switched on and the cookpot symbol appears. Then select

Set the required end time with the

cookpot symbol appears again when time of day = the calculated start time.

At this point you can put the food in the cooking chamber, set desired oven function and cooking temperature. After the

automatic programme has ended, the symbol

relay are switched off.

Minute Minder:

Select

button and set required time with

After the time set has elapsed, the audible signal sounds.

Audible Signal:

The audible signal (1 Hz interval) sounds at the end of a minute minder cycle or of a cooking programme for a period of

7 minutes. The signal can be cancelled by pressing any function button. Pressing the

previously selected a function the frequency of the signal changes. A selection from 3 possibilities can be made. The

selected signal is audible as long as the

Programme Start and Verification:

A programme, which has been set, is carried out after setting the time required. The "time-to-turn" can be verified at any

time by selecting the appropriate function.

Setting Error Identification:

The setting is incorrect if time of day is in between the calculated cooking start and end times. If an error has been

made, this will be indicated by the audible signal and by the symbol

by changing one or both functions.

Cancelling a Programme:

A programme can be cancelled by selecting the manual function. After a programme, which has been set comes to an

end, it is automatically cancelled.

PROGRAMMED COOKING MODE: Turn knob right, clockwise, and select desired cooking time. At end of

cooking time, oven will be automatically turn off and a beep signal will be heard. Then, to stop the beeping signal you

must push timer knob.

and

buttons together. The relay contacts will switch on. The

and

buttons. The relay and the cookpot symbol are switched off. The

and

button is pressed.

decreases it. The count-up or countdown speed increases the

buttons pressed together while setting time of day with

button and the Hand symbol will come on. On five buttons Elect.

and

buttons. The

blinks.

and

button. The

function and the earliest possible end time is displayed.

blinks. The audible signal is heard and the cookpot symbol and the

button. As the time set elapses the bell symbol is displayed.

"A"

and

buttons.

"A"

symbol will be erased, the

"A"

and cookpot

"A"

symbol appears. The relay is

button without having

flashing. The faulty setting can be corrected

and

symbols appear.