- ページ 21
換気フード Electrolux 922718のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Electrolux 922718 24 ページ。 Built-in hood for electric oven
Electrolux 922718 にも： インストレーション・マニュアル (32 ページ)
ページを印刷する
NOTE!
In case of malfunction, follow the indications given by the appliance; if required, contact Customer Care and carry
out the following procedure:
1.
Disconnect the hood and the oven from the mains power supply;
2.
Disconnect the oven by means of the circuit breaker ahead of the it.
Malfunction
Hood/Fan blocked
NOTE!
Repair and extraordinary maintenance must be carried out by specialised and authorised personnel, who
can ask the manufacturer to supply a servicing manual.
NOTE!
It is advisable to stipulate a preventive and scheduled maintenance contract with Customer Care.
Disassembly
•
All scrapping operations must occur with the hood stopped and cold and the power supply of the hood and
oven disconnected;
•
Work on the electrical equipment must only be carried out by a qualified electrician, with the power supply
of the hood and oven disconnected;
•
To carry out these operations it is necessary to use: overalls, safety shoes and gloves;
•
During disassembly and handling of the various parts, the minimum height from the floor must be
maintained.
Error label
Possible causes:
˃ Oven damage
-
˃ Hood's Electrical power supply off
Hod0
˃ Fan safety thermostat overtemperature
˃ Automatic Controller damage
˃ Hood/oven interface cable disconnected or damaged
˃ UV-C lamp's cassette are not in right position
Hod1
˃ The cover panel of central technical compartment (UV-C) are not in
Hod2
appropriate position or are not properly closed
˃ The Demister and Water Separator Filter are not in appropriate position
Hod3
˃ Hood's UV-C lamp 1 and/or 2 missing or not working
Hod5
˃ Hood's UV-C lamp 3 and/or 4 missing or not working
Hod6
231007 OM_HO_04_ELUX_EN.docx -
21