- ページ 12
ドリル Atlas Copco LCD 1500のPDF 安全および取扱説明書をオンラインで閲覧またはダウンロードできます。Atlas Copco LCD 1500 20 ページ。 Hydraulic core drill
ページを印刷する
Safety and operating instructions
Data plate
B
E
C
H
A.
Maximum permitted hydraulic oil flow
Machine type
B.
Maximum relief valve setting
C.
D.
The warning symbol together with the book
symbol means that the user must read the
safety and operating instructions before the
machine is used for the first time.
Serial number (is also stamped in the valve
E.
housing).
The CE symbol means that the machine is
F.
EC-approved. See the EC declaration which
is delivered with the machine for more
information.
G.
Year of manufacture.
H.
Maximum nominal operating pressure
Noise level label
WA
xxx
dB
The label indicates the guaranteed noise level
corresponding to EC-directive 2000/14/EC. See
"Technical data" for accurate noise level.
EHTMA category
The machine is clearly marked with EHTMA
categories. It is important that any power source used
is in a compatible category. If any doubt, consult an
authorised supervisor.
12
D
F
PC
xxxxx
A
G
Safety label
RPM label
Installation
Hoses
For connection on the machine, the hydraulic hose
must be approved for a working pressure of at least
172 bar (2,500 psi) and have a 12.7 mm (½ in.) inner
diameter. To resist exterior wear and tear, we
recommend using a 2-layer hydraulic hose. The
machine connection marked P (pump) is the oil inlet,
and the connection marked T (tank) is the oil outlet.
Always connect both hoses and make sure that all
hose connections are tight. Never carry the machine
by the hose.
Quick-release couplings
The original hydraulic hoses are fitted with Flat-Face
quick-release couplings that are strong and easy to
clean. The quick-release couplings are fitted so that
the male connection supplies oil and the female
connection receives oil.
NOTICE Wipe all couplings clean before
connecting. Ensure that couplings are clean and
correctly engaged before operation. Failure to do so
may result in damage to the quick couplings and
© 2015 Construction Tools EOOD | No. 3392 5189 01c | 2015-01-31
LCD 500, 1500
Original instructions