ページを印刷するAssembly
1
Assembling the
Fix the switch (3), the capacitor (2), and
On/Off switch
the other electric parts with screws.
2
Mount the pair of handle shells (1).
1
Mounting the
Insert the electric field (3) into the motor
motor
housing (mind the right position!).
2
Insert the air conduction ring (2) and let it
engage.
3
Press on the eccentric, the bearing, the
ball bearing, the locking ring, and the
pinion (flush) with aid of a press and a
forcing disk.
4
Press the eccentric (7) in the gear box and
secure it with screws (the screws must be
covered with securing device). Insert the
sealing ring.
5
Half insert the piston (5) into the cylinder,
and insert the cylinder into the gear case.
At the same time hang up the connecting
rod in the eccentric wheel shaft. Secure
the cover (6) with screws.
6
Insert the armature (4) into the gear case.
If necessary, hit it lightly with a plastic
hammer.
7
Insert the gear case together with the
armature into the motor housing.
8
Fix the gear case to the motor housing
with screws. Fasten the screws
diagonally.
9
Re-assemble the pair of carbon brushes,
the retaining clip (8), and the carbon brush
holders (1).
Repair Instructions No. 162.11/95
PHD 26/ PH(D) 38/ PH 240 D/ PH 350 (D)
3
2
1
6
5
4
3
2
1
PAGE
5
1
7
2
1
8