ページを印刷する1
PHE 6 H:
Knock the bevel gear (1) from the gear
Detaching the
housing (3) with aid of a mandrel (lead the
bevel gear
mandrel through the opening in the hous-
ing).
2
Remove the bearing (2) with aid of a pull-
ing-off device or knock the housing with
the opening against a wooden supporting
plate.
1
PHE 6 S:
Remove the following parts, hitting the
Detaching the
side of the machine lightly with a hammer
rotary stop
for support:
- locking ring (6) and
- sleeve (5)
2
Detach the spring ring (3) from the
sleeve (5) and remove the rings (2 and 4)
and the spacer (1).
1
PHE 6 S:
Remove the cylinder (5) from the housing
Detaching the
by hitting the front part of the housing light-
cylinder
ly with a plastic hammer.
2
Remove the spring ring (3).
3
Remove the spring washer (2).
4
Remove the bevel gear (4) with the bear-
ing (1).
5
Pull the bearing (1) from the bevel
gear (4).
Repair Instructions No.181.03/98
1
1
1
PHE 6 H / PHE 6 S
3
2
2
3
5
4
6
2
3
5
4
PAGE
6
12
13
14