- ページ 21

スピーカーシステム Bose Videobar VB1のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Bose Videobar VB1 47 ページ。 Display mounting kit
Bose Videobar VB1 にも：クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), よくある質問 (8 ページ), 重要安全取扱説明書 (17 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ)

Cable Management

The included cable management cover can hold all permanent cabling in place against

a wall.

To install the cable management cover:

1. Place and hold the back of the cable cover (F) (the piece with the screw holes)

against desired location on wall.

2. Mark the center of the two screw holes on wall, and remove the back of the cable

cover.

3. If that part of the wall has a stud behind it, drill two 2.4 mm (3/ 3 2 in) holes into the

wall.

If that part of the wall has no stud behind it, drill two 5 mm (3/ 1 6 in) holes into the

wall.

4. If that part of the wall has no stud behind it, drive the two small drywall anchors

(G) into the wall.

5. Align the back of the cable cover (F) with the screw holes.

6. Drive the two small flat-head screws (H) into the back of the cable cover to secure

it to the wall.

7. Gather the cables and place along the "guide" of the back of the cable cover (on

the wall).

8. Remove the adhesive strip from the cable cover foam (F).

9. Firmly place the foam strip on the back of the cable cover, next to the gathered

cables.

10. Place the front of the cable cover (F) over gathered cables and foam so it adheres.

SETU P

Small drywall anchor (2)

Small flathead screw (2)

2 1

E N