- ページ 4

屋外ライト DS Produkte 06777のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DS Produkte 06777 8 ページ。 Daylight standing lamp

ページを印刷する

Before Initial Use

Remove the foils and transport guards and make sure that the

product contents are complete (see chapter "Product contents and

article overview") and check for any damages from transport. If you

identify damages to the components, do not use them (!), instead

contact our customer service centre.

Set-Up

1. Remove the transport protection be-

2. Screw the tube mount (5) ﬁ rmly onto

3. If necessary, undo the locking screw

4. If necessary, pull the cables on the

5. Twist the upper tube (7) onto the

6. Twist the lower tube (7) onto the

7. Join together the two connectors

8. Guide the cables into the tubes

9. Plug the tubes onto the tube mount (5). When you do this, make

sure that the recess for the locking screw on the lower tube (6)

and on the tube mount (5) are above one another.

10. Fix the tubes using the locking screw on the tube mount (5).

Putting Into Operation

1. Place the article on a dry, even surface.

2. Turn the lamp head (1) to the position you want. The lamp can

be inﬁ nitely adjusted using the ﬂ exible lamp neck (3).

3. Insert the mains plug into a properly installed plug socket that

is easily accessible.

4. Switch on the article by moving the On / Off switch (8) to the I

position.

5. To switch it off, move the On / Off switch (8) to the 0 position.

Cleaning and Storage

PLEASE NOTE!

■

Remove the mains plug from the plug socket before cleaning

the article.

■

Do not use any corrosive or abrasive cleaners to clean the

housing. They could damage the surface. If needed, clean the

housing with a damp, soft cloth.

•

Clean the article if necessary using a soft, dry cloth.

•

Store the article in a dry, clean place that is not accessible to

children and animals.

DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany •

*) Calls to German landlines are subject to charges. The cost varies depending on the service provider.

tween the base (4) and tube

mount (5).

the base (4).

from the tube mount (5).

lamp neck (3) through the two exten-

sion tubes. When you do this, make

sure that it is pulled ﬁ rst through the

upper tube (6) and then through the

lower tube (7).

lamp neck (3) to secure it in place.

upper tube (6) to secure it in place.

Make sure that the cables are not

trapped.

(on the base and on the cables in

the tubes). You should feel and hear

them click into place.

which have been screwed together.

Customer Service / Importer:

Troubleshooting

If the article does not work properly, check whether you are able to

rectify the problem yourself. If the problem cannot be solved with

the steps that are listed, contact the customer service department.

Do not attempt to repair a defective electrical device

yourself!

If the article will not switch on, check the following:

•

Is the mains plug inserted in the plug socket correctly? Correct

the ﬁ t of the mains plug.

•

Is the plug socket defective? Try another plug socket.

•

Check the fuse of the mains connection.

Technical Data

Product number:

Model number:

Colour temperature:

Voltage supply:

Power:

Protection class:

Disposal

Dispose of the packaging in an environmentally friendly

manner and take it to a recycling centre.

Dispose of the article in an environmentally friendly manner

at a recycling centre for used electrical and electronic

devices. More information is available from your local

authorities.

06777

CF-001M / LED

approx. 5500 K

220 – 240 V ~ 50 Hz

12 W

✆

+49 38851 314650 *)

Z 06777 M DS V2 0618

Instructions