- ページ 2

ANSA RS-1 Roller Door Remote Control System

Contents

1

2

2.2

3

4

5

RS1 Control Board Overview & Wiring Schemes

6

7

8

9

Commissioning

Installation instructions

Please read these instructions carefully prior to commencing installation of the unit. Operate unit only when the door is in full view and

free from any obstruction. No one should enter or leave the garage while the door is in motion.

This booklet covers RS-1 units manufactured from 01.01.2010 having the PCB identification

NOTE TO INSTALLER - PLEASE ENSURE THIS MANUAL REMAINS WITH THE END USER AS IT CONTAINS IMPORTANT SAFETY INFORMATION

Installation Company: ......................................................... Installer: ......................................................... Tel: ................................................. Fitting Date: ........................

The ANSA RS1 control unit is designed to operate roller garage doors fitted with single phase tubular motor drives. Equipped with "rolling

code" high security remote controls, allowing easy memorisation of up to fifteen transmitters. The unit has all the features needed for efficient,

safe and reliable operation of roller doors including built-on courtesy lamp, operating button and multi- function red indicator LED. This guide

includes information on ANSA Photoelectric Safety Beams, ANSA Light Grid Safety System, ANSA Alarm System and popular ANSA access

controls.

2

Your Door Supplier will recommend the ideal combination of access control and safety

options to suit each installation and program the system accordingly. As a guide, the

general operation for a fully commissioned door is as follows:

2.1 Keyfob Transmitter Operation

To open the door, press the button on the keyfob transmitter for one second.

·

The door will fully open and stop automatically at the fully open position.

To close the door, press the button on the keyfob transmitter for one second.

·

The door will fully close and stop automatically at the fully closed position.

Pressing the button during a door opening or closing operation will instantly stop

·

the door and pushing the button again for one second will reverse the original

direction.

Please note that a delay of one second is built into the operation.

·

Allow for this delay after operating the keyfob Transmitter

Multi Channel Keyfobs use one button per door, enabling control of up to 4

garage doors from one keyfob transmitter. These are available on request.

Additional Remote Control Receiver Modules are also available to control

automatic gate systems, driveway lighting and other equipment from

ANSA Multi Channel Keyfobs.

Page 1

10

Adding transmitters & wireless access controls

11

Deleting transmitters & wireless access controls

12

Multi- door control

13

Holiday Mode

14

Fault diagnostic system

15

Dip Switch options & Special settings

16

Problem solving guide

17

Technical specifications

Figure 1

Figure 2

3

(See figure 8)

RS1G